Aluminium brackets Bracket extensions Profiles Tile fasteners

More

More

More

More

Corner fasteners Base profiles Thermal insulating washers Anchors/masonry screws

More

More

More

More

Rivets Self-tapping screws Pins  

More

More

More

 

Rivets

Rivets are used to fasten aluminium profiles to brackets, install the base profile and fasten cladding elements to the aluminium frame.

Important: rivet type and dimensions are indicated in the project documentation for the aluminium frame. Other types of rivets must not be used.

In order to prevent the electrochemical corrosion of the aluminium frame, only aluminium rivets with stainless steel bodies or stainless steel rivets should be used.

AL/E-4,8 rivets  

  1. Stainless steel rivet body (E)
  2. Aluminium rivet head (AI)

Rivet 

Largest possible joint mm

Unit

AL/E-4,8x16  10.0 - 12.0  1200
AL/E-4,8x16 with sealing washer 10.0 - 12.0  0
AL/E-4,8x18 12.0 - 14.0 900
AL/E-4,8x18 with sealing washer 12.0 - 14.0 0
AL/E-4,8x21 14.0 - 17.0 900
AL/E-4,8x21 with sealing washer 14.0 - 17.0 150

 

„bulb-tite" rivetskniedės

  1. Certificate Z-14.1-4.
  2. Aluminium body and head.
  3. Securely attached body.
  4. Impermeable to water and air.
  5. Neoprene washer.
  6. Largest possible joint: 19.1 mm.
Kniedė  Unit
Bulbtite kniedė -5,2x17,5 1000
Bulbtite kniedė-5,2x19,1 1000
Bulbtite kniedė-5,2x22,2 1000
Bulbtite kniedė-5,2x25,4 500
Bulbtite kniedė-5,2x28,6 500
Bulbtite kniedė-5,2x31,8 500