Aluminium brackets Bracket extensions Profiles Tile fasteners

More

More

More

More

Corner fasteners Base profiles Thermal insulating washers Anchors/masonry screws

More

More

More

More

Rivets Self-tapping screws Pins  

More

More

More

 

Tile fasteners

Universal tile fasteners are used to fasten cladding to the ventilated façade frame. The fasteners are made of certified 1.2 mm thick stainless steel. Make of stainless steel: AISI 304.

Advantages:

  • Resistant to corrosion caused by natural atmospheric stress;
  • Low visibility makes them universally suitable for fastening cladding of any colour, as they have no visual impact on the façade;
  • The structure of the small amortisation wings make the fasteners adjust ideally to the thickness of the cladding element and keep it in place even if the thickness of the element varies greatly.
One-sided tile fasteners are used for cladding with a thickness of 7.5 - 11.5 mm. Used on end rows, when beginning and ending cladding installation or between the edges of two cladding elements.
Two-sided tile fasteners are used for cladding with a thickness of 7.5 - 11.5 mm. Used to fasten tiles at four-way corner joints or at intermediary distances between two cladding elements.

Important: if the tile fasteners are to be installed on an aluminium frame, only stainless steel self-tapping screws, stainless steel rivets or aluminium rivets with a stainless steel rivet body should be used. 

The tile fasteners are resistant to natural atmospheric stressors, but stainless steel is prone to corrosion when its surface is coated with electrolytes in which the chloride concentration may exceed the critical norm. There are various sources of chloride, e.g., cleaners that contain hydrochloric acid (HCl) or relax chloride in gas form (Cl2), which becomes chloride ion Cl¯ when it interacts with a metal surface. This may lead to the corrosion of the passive film that coats the surface of the metal and protects it from environmental impact. Therefore, before beginning to clean the surface of a façade that uses such fasteners or where such fasteners are being installed with a chemically aggressive product, the aforementioned properties of stainless steel should be taken into account.